Communicaton of Masterdrive and S7 200 on USS

Shafqat Waqar

Member
S
Join Date
May 2010
Location
Lahore
Posts
2
I am trying to communicate S7-200 with Masterdrive, using the USS library. By using INit and Cntrl blocks , i have successfully turned the drive ON and OFF and changed the speed but it is not reading from the drive. is there any way to solve this problem
 

Similar Topics

V
HC900 communicaton InTouch SCADA
Hello everyone. I am using HC900 plc from honeywell and the software HMI scada. I can comunicate with the plc using scada, it appears the green...
Replies
1
Views
480
ynpmoose
Y
V
HC900 communicaton InTouch SCADA
Hello guys, Can anyone help me on how to communicate from the honeywell PLC HC900 to the SCADA software from AVEVA the InTouch software ? Thank...
Replies
8
Views
911
yamotorola
Y
B
Beckhoff Controllogix communicaton
Hello everyone, I am trying to establish communication between HiPac and Allen Bradley PLC using Beckhoff ethernet/ip module. As I read before...
Replies
2
Views
1,851
kamenges
K
A
Communicaton between plcs
Dear All, I have the PLCs with the following communication protocols Siemens S7 1200 with Ethernet Mitsubishi with Modbus RTU master actually I...
Replies
0
Views
1,147
amulyan
A
M
s7-400 function modules and communicaton difference
hi all,,! i want to know that what is difference between function module and communication processor.. i just want to use simple i/0 modules and...
Replies
4
Views
1,525
muds
M
Back
Top Bottom