printer attached with pv100c

mariuslaprairie

Member
M
Join Date
Jun 2009
Location
la prairie
Posts
9
hello again!
i am trying to connect a printer with my panel view pv1000c.
the problem is i do not have a rs232 printer compatible.
can i use a normal printer with a n adaptor or something?
 

Similar Topics

P
OMNI FLOW COMPUTER TO HP PRINTER VIA ETHERNET
Has anyone installed Hp laserjet pro 4203 to OMNI 3000 or 6000 via ethernet..Is there a specific Config? I have a problem..Please advise
Replies
0
Views
54
Papou
P
C
Controlling "cab SQUIX 4 M" printer via Allen Bradley
I'm a Manufacturing Engineer with limited PLC experience and I am doing some research for our Controls Department. Does anyone have experience...
Replies
4
Views
175
Chaldaean
C
K
Omron CX-Programmer with Zebra ZT610 Printer Issues
Hello ! I am trying to use an omron cj2m-cpu33 with a CP1W-CIF01 plug in serial connector to talk to a zebra ZT610 printer. I am getting the data...
Replies
8
Views
365
kevilay
K
P
Arca Linerplus Printer/Applicator
Shot in the dark here, but a customer has this Arca Linerplus Advanced 4.0 printer/applicator for pallet-tagging and we need to change the mode on...
Replies
0
Views
125
phuz
P
R
Studio 5000 and Zebra Printer ZT411
Hi All, I currently have an issue to establish connection between my PLC to Zebra Printer. On my side don't have the ASCII card Module to use...
Replies
9
Views
744
Mowais1
M
Back
Top Bottom