Logix5000 MSG L61 to L32E Help

kbradray

Member

K

Join Date

Jan 2006

Location

Columbia

Posts

175

• Jun 15, 2010

• #1

I have an L61 that I am using to poll several PLC from SLC 5/04 (DH+) to ML 1400 and Compactlogix L32E.
I have successfully set up the message and configured it to take information from a ML1100 and a SLC5/04 DH+.
I cannot get things set up to take information from the L32E. I have a DINT[5] in the L32E with data that I want to pull to a DINT[5] in the L61. I will be going out my ENBT card in slot 1 of the L61 at address 192.168.0.100 and the address of my L32E is 192.168.0.48.
I have been reading here, and I don’t know if it is a path issue or other configuration. I am using the CIP Data Table Read selection.
Please help.

 

vernon1

Member

V

Join Date

Jan 2007

Location

WEST MIDLANDS

Posts

60

• Jun 15, 2010

• #2

Hi, Why not use Produced/Consumed tags to talk to your Compact logix L32E.

Regards.

 

kbradray

Member

OP

K

Join Date

Jan 2006

Location

Columbia

Posts

175

• Jun 15, 2010

• #3

Produced consumed tags

I am new to logix5000. I did try this with no success, so I tried to use what I knew.
I tried to create a produced tag in the L32E and a consumed tag in the L61. I could not figure out how to create the path.
If there are any examples of how to do this I would appreciate seeing them.