Panelview Upload

Hello,

I am trying to upload a application from a Panelview 1000(#2711-K10G8).
I have a RS232 cable#1747-CP3,SER.A. plugged into my laptop and the other end plugged into the terminal rs232 port .
I have tried uploading directly from Panelbuilder 32(results in Error2018), WinPFT(results inError 2018) and Rslinx with no success.
I can use the 1747-cp3 cable to upload and download to the slc5/04.
So I know my cable is OK.
Does anyone have a suggestion?

Thanks

your PV is DH+ not rs232 so you can not download or upload using CP3 cable.

For future reference, please note that even if your Panelview WAS an RS232 version, the CP3 cable will not work. You need something like an AB 2706-NC13 or 2711-NC13 cable.

Thanks for the replies.
Is it possible to use my 1747 -CP3 cable thru the slc5/04 and upload
the panelview application.
My intent is to upload application change password and download.

nmark said:

Thanks for the replies.
Is it possible to use my 1747 -CP3 cable thru the slc5/04 and upload
the panelview application.
My intent is to upload application change password and download.

Click to expand...

Yes, see PDF's below for passthru info.

But with a null-modem adapter on the end of your 1747-CP3 cable
making it a straight thru cable will work also. Or go to Radio Shack/Best Buy and get a straight thru cable. Or a memory card for your PV program.