mitsubishi and modems

maxy123

Member
M
Join Date
Oct 2003
Posts
3
Hi
I have successfully remotely connected to a mitsubishi FX PLC via a mitsubishi modem at both ends.
I now wish to use a US Robotics at the PC end but whilst it will dial out and connect to the mitsubishi modem I am unable to get the GX developer to talk to the PLC
Any suggestions would be appreciated
Regards
maxy123
 

Similar Topics

T
Modems with Mitsubishi
I understand it is possible to use a modem with a Mitsubishi E series HMI that will enable it to send alarms/reports via email. Presumably the...
Replies
2
Views
6,067
jim5
J
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
3
Views
61
parky
P
S
MITSUBISHI ALPHA AL2-24MR-D Controller
Hello! If someone can help me with the following problem. I can't change the phone number. Do I really need the interface (AL-232CAB - Programming...
Replies
0
Views
59
soro4gsm
S
M
how to communicate FactoryTalk Optix and Mitsubishi Q Series
how to communicate FactoryTalk Optix and Mitsubishi Q Series. I want to know the details of that
Replies
0
Views
64
MIIN
M
M
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
Replies
0
Views
69
MIIN
M
Back
Top Bottom