s7 200 and PanelView C300 Comunication Problems
- Thread starter gmondrax
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
I would try using
1 ~ T
3 ~ R
5 ~ S/GND
They have a 422/485 port the PPI on the 200 is 485.... so just a guess but it may work
1 ~ T
3 ~ R
5 ~ S/GND
They have a 422/485 port the PPI on the 200 is 485.... so just a guess but it may work
Similar Topics
Hi all,
I'm in the process of upgrading a PanelView1200 HMI program to be developed in FactroyTalk View Studio.
The filetype for PanelView 1200...
I tried turning this project down, but the panicked look in my customer's face caused me to tell him I will try to come up with a solution... with...
I lost the manual for this machine built in 2003 and need to put it back together.
I have the Micrologix 1200 and PanelView 300 Micro programs...
Hello Everyone,
Please forgive me for some of my ignorance, I am relatively new to the PLC community.
I am setting up a machine monitoring...
Hi, I'm kind of a newbie at this, but we just replaced a panelview 1200 on a line. But I need to download the program to it. since I couldn't find...
