Coomn between FTView studio ME and RSLogix5000 Emulator

Hello

I want to communicate Facrory Talk View studio ME with RS Logix Emulator 5000 on PC. Please anybody can help me for communicaton configuration on FTView side(RSLinx Enterprise),RSlinx classic and RSLogix5000 emulator side.
HMI is Panelview PLus 600.
I coud down load program successfully in Emulator and go onlie.
But i am not able to Communicate RSLoGIx 5000 Emulator with FT Studio ME

Thanks

Chandrakant

chapter 5 setting up communications
viewme-um004_-en-e.pdf

If the emulator is running on the same PC where you are using FT Studio then simply use the virtual backplane driver that is automatically included in RSLinx Enterprise.

Make sure in RSLinx Enterprise you are using the Local (Design) tab and not the Remote (Runtime).

OG