S7-Modbus CRC16 code

cagliostro

Member
C
Join Date
Feb 2007
Location
vi
Posts
106
Hi all,

like the title of the thread, I'm looking some sample code for realize the CRC16 routine using S7 STL or SCL language for Modubs RTU com.
Someone can suggest me or post a sample code??

Thanks in advance.
 

Similar Topics

K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
2
Views
23
Steve Bailey
Steve Bailey
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
51
Voltimus
Voltimus
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2
Replies
26
Views
309
OkiePC
OkiePC
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
117
Corsair
C
T
Modbus registers
Good day guys. I have a third party device with its Modbus registers which I want to copy/set up on a plc because I need to convert my Modbus tcp...
Replies
3
Views
124
Corsair
C
Back
Top Bottom