Hi , Does anyone know if you can have 2 plc's connected to your computer via 2 seperate comm ports and use Advanced HMI, with controls on the form for each PLC.I have tried this by selecting DF1comm1 & DF1comm2 but you cannot select different com ports in the properties box.Can anyone help?
Talking to 2 plc's at once using Advanced HMI
- Thread starter fingers51
- Start date
sthompson
Lifetime Supporting Member + Moderator
The best place to post this question is on the AdvancedHMI Thread. Archie, and some of the other members on the Thread are best equipped to answer your question.
Have a look at this Thread, there may be some clues:
http://www.plctalk.net/qanda/showthread.php?t=51758&highlight=advancedhmi
This is Archie's last Post to this Thread:
http://www.plctalk.net/qanda/showpost.php?p=384269&postcount=74
Stu....
Similar Topics
Hi All,
Got a funny issue. I have a 1756-L85EP and a 1756-EN2TR in the same chase. The client asked for the Ferrari and the 3 lane highway!!!
We...
Here's my scenario:
Using a standalone NX-SL3300 with a NX-EIC ethernet IP adapter. I figured I could potentially use the Ethernet/IP Slave...
I have been tasked with a new controls project involving an S7-1215C PLC and Movicon 11.4 HMI software running on a PC. The two devices will be...
Hi, I have a Festo PLC (CPX-CEC-C1) that I want to talk to through the CANOpen port. I have a CAN-USB converter from Laciwel AB (canusb.com).
The...
RSlinx has become unrelable when we have many plc's talking through it so we are trying to implement wonderwares built in I/O server. we changed...