Here what we wanna do currently, we have a S7-200 PLC with a HMI (TP 177). The PLC drive two sequences completely independent one after the other. with each instruction in the HMI. But to optimize, we wanna be able to do the 2 sequences in the same time. Is that the hmi may allow the display of two different sequences at the same time? We will probably have to buy a larger hmi.
Siemens
- Thread starter wayne012
- Start date
Similar Topics
I have established an online connection to a machine using an S314 processor.
I am using an mpi connector and simatic manager.
The online...
Hi everyone,
i have a Siemens S7-300 Cpu 314C-2 DP with several cards of i/o and servos
my laptop has TIA version 16 and 17 loaded and...
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
Good morning fellow sea captains and wizards,
I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
Hi everyone, I am an omron plc tec , lately I came across a siemens s7 200 cn plc .
Can someone help me regarding the software required and...