ijazmoughal
Member
Hi all. I am just new in PLC. I want to access internal counter of CPU95 U. Can any one help me how to write code?
How to access internal counter of CPU95U
- Thread starter ijazmoughal
- Start date
ivo.maenen
Member
- Join Date
- Nov 2003
- Posts
- 663
What do you mean with 'internal counter'? Do you mean the x kHz counters or normal S5-counters?
ijazmoughal
Member
OP
I mean xKHZ counter.
Manglemender
Member
Manual Page 119
Here is the address information from the manual.
Here is the address information from the manual.
Similar Topics
Hi Siemens guys!
I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ?
In the Simatic manager, we used Netpro to do...
I have to provide remote access and control to a touch screen. I was thinking about using Weintek and the Weincloud. Does anyone know if this is...
Greetings,
I am working on a project and I would like to scale %AI to -10.0 to 10.0 VDC. The module Input data is stored as a 16 bit Integer and...
Hi all
Trying to remotely connect to a TIA Portal PLC.
I can ping it without a problem but can't get my software to connect. I've opened port...