problem with FactoryTalk -> Configuration checklist -> Step 3

pbr_forum

Member
P
Join Date
Aug 2010
Location
Rimouski
Posts
15
Hello I have a problem with Step 3. On the menu at the bottom, I would like to have «None» under the column «Bindings» (see checklist_step3 figure). How can I do that?

Thank you!

checklist_step3.jpg
 

Similar Topics

H
FactoryTalk View SE Alarm problem
Hi all. I´ve got a little problem with my FT View SE alarm window. On my PLC program, I have 200 SINT for alarms, in which every bit is for one...
Replies
2
Views
168
HyDe
H
O
FactoryTalk SE Popup on every client causing a problem
Hello, this is my first time posting and I am looking for assistance for a specific issue I am having. I am doing work within FactoryTalk SE that...
Replies
2
Views
1,451
JaxGTO
JaxGTO
H
FactoryTalk View Studio Recipe Problem
Hello Eveyone: I have PVPlus Compact 1000 ,and I use FactoryTalk to create recipes now I do not know, how to Export and Import recipe data from...
Replies
1
Views
1,791
RuMo
R
D
FactoryTalk View SE Client display position problem
Hi folks, I'm trying to run an SE client across two monitors with limited success. If I set the client to open with a maximized window then the...
Replies
3
Views
4,752
gclshortt
gclshortt
R
FactoryTalk View SE 9 - Tag Write Problem
Hope somebody can help me here, I've done loads of FactoryTalk SCADA systems with no problems - this one is my first on Windows 10. I was having...
Replies
2
Views
2,365
phuz
P
Back
Top Bottom