I had some trouble with a AB 5/03 last week and eventually found an output card that was bad. After reloading the ladder my 2 IMC 110 cards had two brightly shinning red leds beside the FDBK/U.PWR space. This was a working program prior to this episode. I have no idea what to do and would appreciate any help I could get.
1746 hs imc110
- Thread starter daddys12
- Start date
Similar Topics
I had a 1746-HSCE go suspected bad. have to swap the card in the morning. Other than dip switch settings is there any configuration to do?
Happy Friday everyone!
I recently installed a new module, 1746 NIO4I, into the last slot on this chassis. Got the normal IO mismatch fault, added...
Does anyone know where to get either new or aftermarket 1746-N3 connectors and cables for SLC 32 point discrete in cards?
I have a used MCC that...
I am looking to replace a SLC5/05 processor with an AENTR adapter. Configured the rack in a compactlogix. The connection to all of the cards in...
Heya guys,
I'm looking to connect a Banner Q5XKILAF3000-Q8 (4-20mA) signal into my plc which have a analog input card 1746-NIO4V
and was...