OP177B touch screen problem
- Thread starter aybulus
- Start date
TurpoUrpo
Lifetime Supporting Member
broken
Probably broken.
If you want to know why, investigate if there are scratches in the touch folio - like if someone used a screwdriver or similar to operate it.
Siemens has a protection folio for the touch screen that makes this less likely to happen again.
If you want to know why, investigate if there are scratches in the touch folio - like if someone used a screwdriver or similar to operate it.
Siemens has a protection folio for the touch screen that makes this less likely to happen again.
Similar Topics
i wish anybody can help me , i have problem in this touch screen op177b color PN/DP when i press in position in the screen it give me another...
Hello Guys.
One question. I have to restore a project from a broken OP177B mono(Version 1.0.1.0), to a different OP177B mono panel (Version...
I am trying, without success ,to get a backup of the program in our OP177B PN/DP panel for future use if the existing panel dies. I have tried...
Hello to all,
This is my first post here so be easy on me :). I am curious to know if it possible to read data from Siemens OP177B Panel. I am...
Hello all
To be honest I’m fairly new to the PLC world and even newer to HMIs But here is my dilemma at the moment.
I need to connect a TI 545 plc...