stigmata63
Member
i want to communicate a SLC 5/03 with an micrologix 1400 PLC using ethernet port..how do i proceed???
alle bradley problem (urgent help needed)
- Thread starter stigmata63
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
The simplest method is to equip the SLC-5/03 with a 1761-NET-ENI adapter connected to the Channel 0 RS-232 serial port. This will allow the MicroLogix 1400 to read and write from the SLC-5/03, or allow the SLC-5/03 to read and write from the MicroLogix 1400.
Similar Topics
Hi
I have a problem with the search function in Factory Talk View. The menu is not showing everything. See attached image.
I'm missing out on...
Do this happened to any of you ?
I just succeeded connecting a ml1400 true a new XPmode VM by the means of ethernet. I used a direct cable from...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Dear community,
I am trying to find a tool for Allen-Bradley PLCs similar to SiVArch for Siemens PLCs to automatically generate faceplates and...
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...