C-more & AB1400

Tom@Pton · Oct 11, 2010

I am am looking at a small project using a EA7-T10C HMI from Automation Direct. I would like to use it with an AB1400 but do not see it listed in PLC Protocol. Would it be the same as the 1100? Ethernet. I need the additional I/O of the 1400.

JeffKiper · Oct 11, 2010

Are you using Ethernet or Serial. I am 90% Sure that they will talk.
I recommend using RedLion G3 they are my HMI of choice.

Tom@Pton · Oct 12, 2010

Ethernet. Customer already has some of the C-Mores in use. I try to keep one on hand & don't want to stock another. That & my learning curve keeps getting flatter as years go by.

You would think my local AB rep would reply with an answer. Guess I am not their only customer.

JeffKiper · Oct 12, 2010

I would be calling Automation Direct instead of AB.

Mickey · Oct 12, 2010

The manual says it will talk to a ML1400.
See links below

http://www.automationdirect.com/static/manuals/eauserm/ch6.pdf

http://www.automationdirect.com/static/manuals/eauserm/eauserm.html

randy741985 · Oct 12, 2010

Tom@Pton said:
I am am looking at a small project using a EA7-T10C HMI from Automation Direct. I would like to use it with an AB1400 but do not see it listed in PLC Protocol. Would it be the same as the 1100? Ethernet. I need the additional I/O of the 1400.

Yes all Micro Family will Work. SEE Attached.

C-more & AB1400

Tom@Pton

Member

JeffKiper

Lifetime Supporting Member + Moderator

Tom@Pton

Member

JeffKiper

Lifetime Supporting Member + Moderator

Mickey

Lifetime Supporting Member

randy741985

Member

Similar Topics