jbperdu
Member
Old question perhaps? Will a USB to an RS232 adapter work for going online with tis controller. I currently have a 1761-cbl-pm02 serial to controller cable and hate to pay A/B their asking price for a cable I'll likely only use once.
micrologix1000
- Thread starter jbperdu
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
If the controller is using DF1 protocol, a general-purpose RS232/USB adapter should work. The device I recommend to everyone is the Keyspan HS-19.
If the controller is using DH485 protocol, the only device you can use to connect to it via USB is the 1747-UIC from Allen-Bradley.
If the controller is using DH485 protocol, the only device you can use to connect to it via USB is the 1747-UIC from Allen-Bradley.
Similar Topics
Working on a machine that uses an Allen Bradley micrologic’s 1000 controller. Wondering if there is away to tie in the output to an external...
Hello,
i made a program in rslogix500 for my micrologix1000 plc. can i import this program into the CCW software then convert the program which...
Could someone please guide me in the right direction? I currently own a 1761-L32BWB (Micrologix1000 processor) and a 1761-CBL-PM02 (programming...
Ihave a machine with a failed Moeller PLC that I have no documented logic for, and am replacing with a micrologix 1000 1761-L20BWB-5A. Most of my...
Hi all.
Ive made a small I:0/0 push button and a O:0/0 light program to test that my plc is working.
I got the bush button on a 24VDC and the...