i HAVE COME ACROSS THE OMRON HMI NP SERIES NPMQ0001.HOW I CAN CONNECT A THERMAL PRINTER TO NP SERIES HMI USING RS232 AND TEMP.CONTROLLER TO NP SERIES USING RS485/422.CONNECTION CONFIG DETAILS ARE REQ. AND ALSO HW I CAN GIVE PRINT COMMAND FROM HMI ...HW I CAN LINK THESE TO??
connection of thermal printer and temperature controller to NP designer Omron HMI
- Thread starter sreejit
- Start date
Similar Topics
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Hello gentlemen,
Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Hi all,
My ethernet port on my laptop recently broke and I was hoping to just use a usb-c dongle in the mean time to go live on my PLC until I...
Not a PLC question but I need expert help on this.
My FactoryTalk stopped communicating with the server its hosted on. I had an error stating...
I have to start out by saying I am not a PLC programmer and I have basic programming skills but mainly use software as a troubleshooting tool. I...