I am looking for the least expensive way to load data into an Omron controller (CJ Series) from a Visual Basic.Net 2005 application. Can anyone tell me what I need or recommend any software packages to do this?
Thank you.
Thank you.
VB.NET to Omron
- Thread starter Tweeker
- Start date
BITS N BYTES
Lifetime Supporting Member
Use either the native Hostlink or FINS communications.
There are quite a few examples and code for this at MrPLC.com.
There are quite a few examples and code for this at MrPLC.com.
Similar Topics
I have a strange Kepware issue I have been dealing with for a few weeks. I have Kepware setup with the Omron NJ Ethernet driver and reading in...
Hi There.
I have PC to get few tags from PLC into C# windows forms application. What is the best and fastest way?
I could not find Omron in...
We are trying to set up a newer generation Omron PLC (NX/NS Series) with Citect / Aveva Plant SCADA using the Ethernet/IP CIP Protocol to read...
Has anyone had success communicating between the Avery ZM series of weight indicators and Omron CJ PLCs? I can easily do setups when provided...
Hi Guys,
I am trying to read data from Omron CP2E CPU from my Mitsubishi RJ71EN71 with Simple CPU Communication Function.
Suppose it was using...