BMXAMM0600 Analog Module

rashmorbius

Member

R

Join Date

Nov 2007

Location

Pennsylvania

Posts

7

• Oct 25, 2010

• #1

I am trying to simulate either a 0-10VDC circuit or 4-20mA circuit into a Telemecanique BMXAMM0600 analog card (M340 platform). Is there an EASY way to do this? It needs to be adjustable.

 

robertkjonesjr

Member

R

Join Date

Jan 2009

Location

NH

Posts

505

• Oct 25, 2010

• #2

Try Fluke. They make process meters that will source 4-20mA current and I use these all the time to validate scaling and other things on analog channels.

 

504bloke

Lifetime Supporting Member

Join Date

Jan 2005

Location

Down South

Posts

2,721

• Oct 25, 2010

• #3

rashmorbius said:

I am trying to simulate either a 0-10VDC circuit or 4-20mA circuit into a Telemecanique BMXAMM0600 analog card (M340 platform). Is there an EASY way to do this? It needs to be adjustable.

Click to expand...

1.5Volt batteries

1.5
1.5+1.5
1.5+1.5+1.5
1.5+1.5+1.5+1.5 etc

 

rashmorbius

Member

OP

R

Join Date

Nov 2007

Location

Pennsylvania

Posts

7

• Oct 26, 2010

• #4

Thanks for the replies, but I am trying to do this as "cheap" as possible. Is there a way I could use a potentiometer to accomplish this?

 

chud

Member

Join Date

Oct 2007

Location

KALAHARI

Posts

1,122

• Oct 26, 2010

• #5

Is this too check software or the analogue channels themselves? Cant go much cheaper than the batteries for checking the channels. If for software just force the values in the plc