Dears,
I've HMI pannel VT510 ESA connected with a plc (SYSMAC CQM1 OMRON). a communication problem occured between them and a red led (COM2) is flashing in the plc side , when i disconnect the communication cable from the plc side , the red led stop flashing (OFF)! .. please advice me to a way to determine if this problem in vt510 or in the plc?
also, i need the software for vt510 programming..
waiting !!
I've HMI pannel VT510 ESA connected with a plc (SYSMAC CQM1 OMRON). a communication problem occured between them and a red led (COM2) is flashing in the plc side , when i disconnect the communication cable from the plc side , the red led stop flashing (OFF)! .. please advice me to a way to determine if this problem in vt510 or in the plc?
also, i need the software for vt510 programming..
waiting !!