Monitoring wind

tshibagt

Member
T
Join Date
Nov 2010
Location
cincinnati
Posts
1
I'M Guy I'm working on a senior design and im trying to build a monitoring the wing project i know that i will need 8 sensors ,and a Encoder but i dont know what kind off sensors and ENCODER. Ill be using a PLC (Mitsubishi A or Q serie) Any help ? Thanks for the help and education .
 

Similar Topics

M
DL205-1 CPU Monitoring
Hello everyone! I need to connect to a DL205-1 CPU and, as far as I know, I need to use DirectSOFT 6 software for the connection. Is anyone...
Replies
1
Views
62
bernie_carlton
bernie_carlton
U
A tonnage module trend monitoring
Our punch press has a SLC500 with HELM weight module (HM-604-WM) for tonnage monitoring. The operator enters the weight range on the HMI, which is...
Replies
9
Views
201
MikeyN
MikeyN
Z
Connecting and Monitoring a DLR on a Remote Rack
Hello, I have been trying to figure out how to connect to and monitor a DLR that is on a remote rack from my PLC. The local has a 1756-L81E and...
Replies
0
Views
117
Zalewski14
Z
J
Delta Web Monitoring
Good day, we have 15 analog inputs, we need to log the data in excel and monitor these values through web browser. We're planning to go with Delta...
Replies
1
Views
123
Plantationpark
P
O
PLC Comms Monitoring
I have several plc’s that I’d like to monitor Into our SCADA when the comms break or plc faults. These are (SLC-505 & Compact Logic PLC’s) I...
Replies
6
Views
744
I_Automation
I_Automation
Back
Top Bottom