sm@rt access tutorial

gtoka

Member
G
Join Date
Sep 2010
Location
Bs.As
Posts
20
Hi!!
im making the winccflexible-gettingstartedoptions tutorial to connect to hmi via sm@rt access and im get stucked in this step.
I really don´t know where do i need to make this, i can´t found it! (attached picture)
Any printscreen or help would be great!
Cheers

assd.jpg
 

Similar Topics

A
I/O access error on S7-300
Hi Siemens guys! I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Replies
13
Views
150
JesperMP
JesperMP
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
75
mk42
M
BobB
Remote access and control
I have to provide remote access and control to a touch screen. I was thinking about using Weintek and the Weincloud. Does anyone know if this is...
Replies
11
Views
592
atc222
A
A
Proficy Module Parameter Programmatic Access
Greetings, I am working on a project and I would like to scale %AI to -10.0 to 10.0 VDC. The module Input data is stored as a 16 bit Integer and...
Replies
4
Views
66
NetNathan
N
U
What ports / protocol do I need to open to remotely access a TIA Portal 1500 PLC?
Hi all Trying to remotely connect to a TIA Portal PLC. I can ping it without a problem but can't get my software to connect. I've opened port...
Replies
8
Views
322
uptown47
U
Back
Top Bottom