Griffin Member G Join Date Nov 2010 Location Cork Posts 3 Nov 19, 2010 #1 When trying to read the prog from a FX-32MT using GX developer I can`t see the correct PLC in the drop down menu. Can anyone tell me which PLC I should pick from this menu
When trying to read the prog from a FX-32MT using GX developer I can`t see the correct PLC in the drop down menu. Can anyone tell me which PLC I should pick from this menu
AndersW Member A Join Date Jan 2010 Location Sweden Posts 24 Nov 19, 2010 #2 There should be an FX/FX2 selection at the very top where you pick type in the selection list Thats if it doesnt have any other number on the PLC itself then FX
There should be an FX/FX2 selection at the very top where you pick type in the selection list Thats if it doesnt have any other number on the PLC itself then FX
Goody Member Join Date Apr 2002 Location Huddersfield W Yorks UK Posts 1,081 Nov 20, 2010 #3 When you try read the program from a plc, it will be automatically detected. You just need to go online and upload. But you can choose FXU/FX2C for that FX cpu
When you try read the program from a plc, it will be automatically detected. You just need to go online and upload. But you can choose FXU/FX2C for that FX cpu