vojvoda1982
Member
Dear friends,
I have a problem with IO Field reading in WinCC Flexible 2005 Advanced! This IO field is point to the internal tag current_float, which is REAL type. This tag contain scaled value from external tag current_plc (his address is PIW268, type WORD).
tag: current_plc > events > Change value > Linearscaling:
y = current_float
a = 0.01
x = current_plc
IO Field mode is set to Output! Problem is when a runtime is started, IO field can't display scaled value from PLC address PIW268! It's display 0.00! I can't understand way?!! It seems to me everything is fine! In PLC, value of PIW268 is changing! Why this change isn't displayed on my WinCC Flexible application in IO field?
Other tags I've created, slider control, switch on/off (for writing on PLC) works fine!
I have a problem with IO Field reading in WinCC Flexible 2005 Advanced! This IO field is point to the internal tag current_float, which is REAL type. This tag contain scaled value from external tag current_plc (his address is PIW268, type WORD).
tag: current_plc > events > Change value > Linearscaling:
y = current_float
a = 0.01
x = current_plc
IO Field mode is set to Output! Problem is when a runtime is started, IO field can't display scaled value from PLC address PIW268! It's display 0.00! I can't understand way?!! It seems to me everything is fine! In PLC, value of PIW268 is changing! Why this change isn't displayed on my WinCC Flexible application in IO field?
Other tags I've created, slider control, switch on/off (for writing on PLC) works fine!