FTSE Tag Server Crash

crimson75

Member
C
Join Date
Dec 2010
Location
CT
Posts
8
If I have a number of PLC's connected to SE and I disconnect one of them (lose comms), and I am subsequently trying to write a value to a tag in that PLC, the tag server crashes and I lose functionality to ALL PLC's.

Has anyone experienced this?

Nothing on KB, and no help from tech support after a few days of trying now.

Thanks in advance.

(Pic of crash attached as well as current versions being used)

Performance Monitor - Tag Server Crash.jpg Rockwell Add Remove Programs.jpg
 

Similar Topics

xC0MMAND0x
Point to local file from HMI TAG (FTSE 6.1)
Here's the short straight to the point version - I need to display a PDF file on a HMI. I'm using FTSE 6.1 I have AcroPDF.dll setup and...
Replies
1
Views
3,073
xC0MMAND0x
xC0MMAND0x
L
FTSE trend tag substitution
Hi, I am wanting to use a common trend object & change the pens/tags displayed based on the object selected ie PID All tags are in the model &...
Replies
1
Views
1,682
Bob O
B
AshleyParr
FTSE - Waiting For Alarm Events...
Soooooo, i set up the FTSE Alarm & event server and everything looks good. I had to reboot the server (also the client while im testing)...
Replies
5
Views
4,901
Operaghost
Operaghost
I
FTSE 6.1 Server with FTSE 7.0 Studio
Hello, I am currently working in a plant with a Network SE installed. One HMI server, one engineering workstation (with Studio) and several...
Replies
12
Views
2,701
Operaghost
Operaghost
xC0MMAND0x
VBA References RSView32 to FTSE
Working on a conversion project from RSView32 to FTSE...Anyone who has done this before knows that the VBA is handled very differently. The...
Replies
0
Views
3,558
xC0MMAND0x
xC0MMAND0x
Back
Top Bottom