Eds file

Please send the link for eds file download (1762-iq32t -micro logic) module.

The 1762 series I/O modules are used only with Allen-Bradley MicroLogix controllers and are configured using RSLogix 500 software.

There are no network adapters for the 1762 family I/O modules, and therefore there are no EDS files for these modules.

All Allen-Bradley device EDS files can be downloaded from the Rockwell Automation EDS server:

http://www.rockwellautomation.com/resources/eds/

In rslogix 500 programing software How to add the 1762-IQ32T for I/O Configuration.In This I/O Configuration there is no 1762-IQ32T Module.

What version of RSlogix 500 do you have, ?
and what version of RSLinx do you have. ?

See TN 64327 - How to configure a 1762-IQ32T, 1762-OB32T & 1762-OV32T for use with either a ML1100, ML1200 or ML1400 controller when not in the RSLogix500 IO Configuration listing

1762-IQ32T "OTHER" configuration information:
VENDOR ID CODE 1
PRODUCT TYPE CODE 7
PRODUCT CODE 99
2 Input words
0 Output Words
0 Extra Data Length
1762-OB32T "OTHER" configuration information:
VENDOR ID CODE 1
PRODUCT TYPE CODE 7
PRODUCT CODE 100
0 Input words
2 Output Words
0 Extra Data Length
1762-OV32T "OTHER" configuration information:
VENDOR ID CODE 1
PRODUCT TYPE CODE 7
PRODUCT CODE 102
0 Input words
2 Output Words
0 Extra Data Length

eds

i had been created OTHER module in IO configuration for 1762-IQ32T, then compile the program one error has been showing( 'Other' card detected - no current load was taken into account for the card(s))