Eds file

In rslogix 500 programing software How to add the 1762-IQ32T for I/O Configuration.In This I/O Configuration there is no 1762-IQ32T Module

Would be good if you stopped double posting and stopped referring to your problem as an eds file as has already been pointed out

504 Bloke - karthikolive has a valid question.....

There is no entry in the hardware list to add the specified module (I am usingg RSLogix500 Vers 8.10 (CPR9) Build 24).

.... but I agree with your other comment.

karthikolive - Perhaps Ken is your best bet to get a resolution, I can't find anything on the web-site to help. He will be notified if you add your query to your original post.

He may have a valid question, but why post twice and refer to it as eds !

See TN 64327 - How to configure a 1762-IQ32T, 1762-OB32T & 1762-OV32T for use with either a ML1100, ML1200 or ML1400 controller when not in the RSLogix500 IO Configuration listing

1762-IQ32T "OTHER" configuration information:
VENDOR ID CODE 1
PRODUCT TYPE CODE 7
PRODUCT CODE 99
2 Input words
0 Output Words
0 Extra Data Length
1762-OB32T "OTHER" configuration information:
VENDOR ID CODE 1
PRODUCT TYPE CODE 7
PRODUCT CODE 100
0 Input words
2 Output Words
0 Extra Data Length
1762-OV32T "OTHER" configuration information:
VENDOR ID CODE 1
PRODUCT TYPE CODE 7
PRODUCT CODE 102
0 Input words
2 Output Words
0 Extra Data Length