S5 eprom burning

isteak007

Member
I
Join Date
May 2009
Location
NewYork
Posts
216
Can i burn S5 EPROM (6ES5 375 0LA15) Directly from CPU (95U/100U)?
is it possible?

1. if possible then what is the method?
2. if i need a Prommer how can i buy it online?
 
1. No, only EEPROM can be programmed directly on the CPU.
2. Depends: do you want a new one or a used one?
 

Similar Topics

T
317-6tk13-0ab0 memory card eprom error CPU 317T-2 DP,
Hi , we try to get a CPU 317T-2 D back to life,memory card was defective and with some resets we have only sf light red flickering we...
2
Replies
28
Views
703
JRW
JRW
R
Siemens CPU 224 Program Transfer from EPROM
I have a Siemens S7-200 with a bad output. Bought a new processor, PN 6ES7 214-1AD23-0Xb0, to replace it. I have an EPROM Memory Module, PN 6ES7...
Replies
2
Views
798
L D[AR2P#0.0]
L
M
Using Step5 EPROM Progger In Modern Times
Hello, I have a one off job to modify some Siemens Step5 software at a local factory. The PLCs are S5-100U (CPU103). I have uploaded the PLC code...
2
Replies
16
Views
4,277
JesperMP
JesperMP
C
S7 300 EPROM replacement
Dear All, I have an S7 300 damaged CPU. I don't have it's backup program. I want install a new CPU. If I replace the new CPU internal EPROM with...
Replies
3
Views
1,653
sigmadelta
S
O
LM90 6.01 vs. CPU331+EEPROM WRITE FAILURE
"(S44) PLC requested action has failed" Result when WRITE the RAM program to the EEPROM. No pre-confirmation message first. VERIFY fails too...
Replies
6
Views
1,369
OneTechandaWrench
O
Back
Top Bottom