How can i create more than 8 address in citect

nasiri

Member
N
Join Date
Dec 2010
Location
PARIS - Chatelet
Posts
1
Hi
i use of citect Ver6.0 .i have 12 analoge input data.when i created 12 Address Tags,(Ai00,Ai01,Ai02.....Ai07,Ai1,Ai2,Ai3,Ai4) A01 and Ai1, Ai02 and Ai2 , Ai03 and Ai3 ,Ai04 And Ai4 has conflict together .also i use of 2 ADAM 4017+ (8 Analoge input ) module (ADVANTECH )
i generated 2 I/O Device named IODev_4017_1 & IODev_4017_2
Pls advice Me !



tag.jpg
 

Similar Topics

S
How to create connection from PLC to VFD with ethernet cable?
Hello, I've been trying to learn this a while now and still have not found out how this works. I have an Omron CJ2M PLC and an ABB ACS 355 VFD...
Replies
1
Views
243
jschulze
J
C
[iFix] - Most efficient way to create multiple alarms
Hello, I have to deal with iFix again and am looking at the most efficient way to create alarms to display in iFix, i.e. not creating an...
Replies
0
Views
155
cardosocea
C
V
Can't create and application in Aveva Intouch application manager 2023
Good morning to all, I have the following issue, I installed everything of intouch including the patch, it is the 2023 version. The...
Replies
0
Views
330
_V_
V
D
Error 716-8002801D (Failed to Create project file)
So, I finally got versioin 27 installed on my Windows 10 VM. However, now I can't upload a project from my lab controller. I have the above error...
Replies
0
Views
1,129
desertsurf520
D
F
FT View SE - create .DAT file
Hi all, I have few GB of logged data created by RS View 32 Works, it is all in .DBF format. At the moment, my company wants to shift all data to...
Replies
14
Views
1,451
Fornax
F
Back
Top Bottom