pid controlling of tec

sarathbabu

Member
S
Join Date
Dec 2010
Location
singapore
Posts
1
I need information of using KV-TF40 using PID values for controlling Thermo Electric Cooler.I want to control the response of temperature output.There is a lot of fluctuation in the output if am using normal operation.Kindly give me suggestion to this problem.
 

Similar Topics

N
Controlling without a PID
I was reading a thread about how to do some involved things with a PID and didn't want to hijack that thread, so here we go... I control a lot of...
Replies
2
Views
775
BOWILLY
B
N
Controlling without a PID
I was reading a thread about how to do some involved things with a PID and didn't want to hijack that thread, so here we go... I control a lot of...
Replies
1
Views
915
James Mcquade
J
T
PID, Controlling Position with Velocity Clamping
I'm using a three term equation to control position, but the velocity profile from point A to B is failing expectation. I'm assuming the...
Replies
3
Views
1,412
drbitboy
drbitboy
A
Controlling two PF525 drives with a PID Loop
Hello all, I have been tasked to control two PF525 VFDs with at least one PID loop in a duplexing pump scenario. The project pumps water from a...
Replies
7
Views
2,620
jraef
J
P
Controlling of Motor open and close through PID
Hi, we are using DeltaV Dcs. We have problem with Motorized damper, we have motorized damper, But position feedback ( 0 - 100%)is there. How to...
Replies
3
Views
1,897
prabhuinst
P
Back
Top Bottom