[email protected]
Member
Guys,
1. I have 2 control logix racks each with a 1756-L64 processor in redundant mode with a high speed link between them.
This link will inteface via an ethernet 1756-ENBT bridge in each rack.
2. My concept is to communicate via Fiber Optic network media from the 2 redundant racks with 2 remote I/O racks in ring topology aproximately 3000ft away.
3. We use to use a coaxial network media intefacing via 1756-CNBR modules
4. I want to use an Optical Control Logix Module - OCX slot mounted to interface with the remote I/O racks via Fiber Optic
5. Phoenix Digital supplies these modules as an third party to Allen Bradley
6. My question is - will I be able to use these OCX-CTN modules to inteface with the remote I/O and the 1756-L64 processors without utilizing other intefaces and coax for example 1756-CNBR
1. I have 2 control logix racks each with a 1756-L64 processor in redundant mode with a high speed link between them.
This link will inteface via an ethernet 1756-ENBT bridge in each rack.
2. My concept is to communicate via Fiber Optic network media from the 2 redundant racks with 2 remote I/O racks in ring topology aproximately 3000ft away.
3. We use to use a coaxial network media intefacing via 1756-CNBR modules
4. I want to use an Optical Control Logix Module - OCX slot mounted to interface with the remote I/O racks via Fiber Optic
5. Phoenix Digital supplies these modules as an third party to Allen Bradley
6. My question is - will I be able to use these OCX-CTN modules to inteface with the remote I/O and the 1756-L64 processors without utilizing other intefaces and coax for example 1756-CNBR
