isteak007 Member I Join Date May 2009 Location NewYork Posts 216 Jan 2, 2011 #1 TP170B Mono to S7-200 & S7-300 PLC Cable Diagram. (MPI or Standard Cable) TP170 Micro to S7-200 Communication Cable Diagram. (MPI or Standard Cable) IF1B port I need those cable diagram
TP170B Mono to S7-200 & S7-300 PLC Cable Diagram. (MPI or Standard Cable) TP170 Micro to S7-200 Communication Cable Diagram. (MPI or Standard Cable) IF1B port I need those cable diagram
moggie Lifetime Supporting Member M Join Date Apr 2002 Location Devon, England. Posts 661 Jan 2, 2011 #2 From the Siemens web site http://support.automation.siemens.com/WW/view/en/19082123 look at section 12
From the Siemens web site http://support.automation.siemens.com/WW/view/en/19082123 look at section 12
isteak007 Member OP I Join Date May 2009 Location NewYork Posts 216 Jan 2, 2011 #3 moggie said: From the Siemens web site http://support.automation.siemens.com/WW/view/en/19082123 look at section 12 Click to expand... no i need cable diagram for TP170B Mono with S7-300 PLC In wincc i find Cable: MPI, DP, Standard I need this cable diagram Thanks
moggie said: From the Siemens web site http://support.automation.siemens.com/WW/view/en/19082123 look at section 12 Click to expand... no i need cable diagram for TP170B Mono with S7-300 PLC In wincc i find Cable: MPI, DP, Standard I need this cable diagram Thanks
moggie Lifetime Supporting Member M Join Date Apr 2002 Location Devon, England. Posts 661 Jan 2, 2011 #4 It does show the "pin out" for the TP to enable you to produce your own cable?
Ned_Flanders Member Join Date Oct 2008 Location In hiding, England Posts 535 Jan 2, 2011 #5 Siemens 6ES7 901-0BF00-0AA0. I think this is the part number. If connecting in RS485/MPI I use a length of profibus cable and two 9 pin plugs with built in terminating resistors.
Siemens 6ES7 901-0BF00-0AA0. I think this is the part number. If connecting in RS485/MPI I use a length of profibus cable and two 9 pin plugs with built in terminating resistors.