califflash
Member
I have a red lion g306 connected to a powerflex4 drive using the dh485 port. My goal is to update the drive parameters at the touch of a button after setting up the drive's communication. I have tags in my red lion. But my problem lies in that the screen will keep updating the parameter tags. I am also referncing drive speed and feedback which need to constantly be updated. Is there a way to control when only he parameter tags are updated?
My maintenance men are not very good about sEtting up drives correctly and also using old drives. But if I need to manually modify parameters, like changing the speed reference, I want it to stay that way until I tell the red lion to update the drive again. Does anyone have any ideas? I find no mention of this in the crimson manual or the reference manual.
My maintenance men are not very good about sEtting up drives correctly and also using old drives. But if I need to manually modify parameters, like changing the speed reference, I want it to stay that way until I tell the red lion to update the drive again. Does anyone have any ideas? I find no mention of this in the crimson manual or the reference manual.