Learning hot programming

To whoever:

I'm wondering, if anyone know where i can go or where to get study material on how to program Allen Bradley plcs?

This is from a previous posting:

http://training.software.rockwell.com/WebUPublic/default.asp

What type of information are you looking for?

Are you looking to take classes online?
Are you looking for community college or trade school classes?
Are you looking for A-B training classes?
Are you just looking?

The previous post showed you were you can get online training from A-B.

This site has excellent tools (that's why we are here after all).

Here is A-B's training site

Here is a site called The Learning Pit that has excellent A-B resources

Check with your local community college or trade schools and there is a good chance you will find a plc class (might not be A-B though).

Allen Bradley has many of their manuals online at:

Allen Bradley Manuals Online / Control Processor Library http://www.ab.com/manuals/cp/

Here are a few of the manuals which may be of help:

SLC 500 Instruction Set Manual http://www.ab.com/manuals/cp/1747-rm001c-en-p.pdf

PLC-5 Instruction Set Manual http://www.ab.com/manuals/cp/178561.pdf

PLC-5 Quick Reference http://www.ab.com/manuals/cp/178571.pdf

PLC-5 Enhanced Processors http://www.ab.com/manuals/cp/17856512.pdf

Try www.techniquetraining.co.uk, this company does PLC and scada training for most manufacturers, and courses can be held on line if required.