rameshmeena
Member
Dear Sirs
I am using Delta PLC DVP14SS11R and would like to connect the extension module DVP08SN11T.
I am using other modules and conenction series as follows.
(1)DVP14SS11R (2)DVP04TC (3)DVP06XA-S (4)DVP08SN11T.
Both DVP14SS11R & DVP08SN11T have same outputs Y0,Y1, Y2..etc So how PLC will identify. I need to get out put from both. So what is the Ladder logic, I am using WPL Soft
Please help
I am using Delta PLC DVP14SS11R and would like to connect the extension module DVP08SN11T.
I am using other modules and conenction series as follows.
(1)DVP14SS11R (2)DVP04TC (3)DVP06XA-S (4)DVP08SN11T.
Both DVP14SS11R & DVP08SN11T have same outputs Y0,Y1, Y2..etc So how PLC will identify. I need to get out put from both. So what is the Ladder logic, I am using WPL Soft
Please help