PDA

View Full Version : AB 2711 PanelView and Micrologix 1400 programming


Irish
February 10th, 2011, 06:05 PM
Hi all!

I'm pretty new to PLC prgramming, and an opportunity has arose at my job for me to "teach myself" how to do this.

I've got a chance to build a small pressure testing machine at work, with an HMI, but I've never programmed one before. I have experience navigating programs with RS Logix, but that's about it. What I was wondering was if you fine people could recommend some training/literature where I could pick up some useful knowledge? This is a "build in your spare time" project, so I'm not in a hurry, but it's something I'm excited about.

Thanks very much in advance for your time!

Oh, and by the way...I saw this site had a book for sale, but I wanted some feedback from the community on it before I bought it.

Mickey
February 10th, 2011, 09:54 PM
Welcome to the forum.

The books and online training of this site are excellent. They are general though
not about just Allen Bradley products.

See links below for some online sample lessons and some low cost training software.

http://www.ronbeaufort.com/sample_lessons.htm

http://www.thelearningpit.com/lp/logixpro.html

See link below for the manuals on your ML1400

http://ab.rockwellautomation.com/Programmable-Controllers/MicroLogix-1400#/tab5

What is the complete catalog number of your PanelView?

Irish
February 11th, 2011, 08:37 AM
Mickey,

Thanks very much for your response. The links that you gave are very helpful. The complete catalog number of my panel view is 2711PC-T6C20D.

Again, thanks very much.

gtr35
February 11th, 2011, 09:07 AM
if you have never programmed an hmi before you should start learning factory talk view

heres a link

http://www.google.com/url?sa=t&source=web&cd=1&sqi=2&ved=0CBcQFjAA&url=http%3A%2F%2Fliterature.rockwellautomation.com %2Fidc%2Fgroups%2Fliterature%2Fdocuments%2Fum%2Fvi ewme-um005_-en-e.pdf&ei=PkJVTe_lKJG6sAO_xuimBg&usg=AFQjCNFEB5UqcA-XSWujl3kqUKLDoGauSg