Cj1w scu 21-v1

HI!
Go to some Omron site and download manual:
W336-E1-10

Here You will find what You need, It is not complicated, You will do it by yourself.
 
Thank you very much for your reply, I'll do it and learn, at the begining I do not have any idea from where to start.

Thank you guys

Jose
 

Similar Topics

R
Pulse Output PLC Omron CJ2M with CJ1W OD211
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...
Replies
0
Views
93
rakhafrds30
R
P
Omron CJ1W
Good. ,how to connect the relay outputs to the CJ1W-OC211 card ?
Replies
6
Views
1,160
BobB
BobB
J
Omron CJ2M PLC with CJ1W-ETN21 card
Hello everyone, I would like advice on the setup below: CJ2M PLC: 192.168.10.01 (Subnet: 255.255.255.0) ETN21 - 192.168.20.1 (Subnet...
Replies
6
Views
1,848
Jothiswarup
J
J
PLC CP1L with CJ1W-CIF12 connected to OMRON MX2 drivers
Hello, I have an installation with an omron plc CP1L with a CJ1W-CIF12 module connected to eight omron MX2 drivers. I use the bus to modify the...
Replies
2
Views
2,143
joserc
J
K
Omron CJ1W-ETN21
Hello all, has anyone configured before 2 CJ1W-ETN21 in a single rack? I am trying to put 2 units of ETN21 couple with my CJ2M-CPU33 to act like...
Replies
1
Views
1,258
BobB
BobB
Back
Top Bottom