Beckhoff plc and troubles with Webvisu

Hello all
I am new here and i have a problem with the webvisu of the Beckhoff.

CX9010-0102
SN:7493
Image:CX9010_HMI_2.24c

I make a visu in twincat noproblem with that.
I do a upload also ok

But when itry to reach te visu on internet is see the visu but NO Variables
they have all 0.0
What am I doing wrong?


With my wago s i have no problem at all but beckhoff

Happy sunday
Stefaan

Hope i post this in te right topic

have you switched on web visualisation in the target setting?
is the program running?
is the address correct. default is zero.
is it updating from PLC.
is the plc address correct, and in same like 192.186.2.102 or something like it.
only the last number should be different.

That is the adress (on my private net)
http://192.168.1.10/TcWebVisu/Index.htm

Yes the progr is running
Yes updating from plc

Under Resources
Then Twincat
Then "Enable Web Visualiation (is not free charge)" is active

What is wrong

Is there someone here with a working link to een plc of Beckhoff?

What is this link maybe is there something wrong in the settings
http://192.168.1.10:5120/upnpdevice/index.htm

Greetings stef

@ shooter knn we niet verder in nederlands doen