I’m using HMI/Vijeo Citect and I want it to take care of some calculation, not the PLC. How to do that, how do I let the Citect constantly make these calculations when it is running. Simple Calculations like like: Variables_A=Variavles_B/2
HMI/Vijeo Citect
- Thread starter joigunni
- Start date
Dua Anjing
Member
Create an event that runs say once a second and put the code as you written it in there.
If it just for display then instead of just putting the tagname in the field try putting the calc. in the field.
If it just for display then instead of just putting the tagname in the field try putting the calc. in the field.
Similar Topics
Hi guys!
I encountered an error on vijeo citect HMI. The system is configured as main and standby HMI.
I have this error on standby HMI, "ERROR...
Hi, I have Schneider MTZ circuit breaker giving Energy value in int64 format (volts,amps etc are in FLOAT)
What options do I have to display...
I'm building a test station for water pumps. The HMI will display GPM, KWh, pressure, vacuum and speed.
Client currently manually writes down...
Hi all,
I'm very new to HMI's and totally new to Vijeo. I've been given the task of helping a company upgrade their Vijeo HMI's from Windows XP...
Dear All,
Is it possible to replace a variables in vijeo desiger like other HMI software by find replace variables to save time.
let's say that a...