Help is needed with B&R Automation studio 2.5.1

Join Date
Feb 2011
Location
England
Posts
9
Hi, I have a PLC code that was written using AS v2.5.1. Unfortunately my AS v3.0 does not let me to open that file. Is there any chance that someone could help me with AS 2.5.1 please? Thank you in advance. Cheers, Andrew
 

Similar Topics

Hi all, I'am looking for the automation of Strip pasting process. Strips will be pasted on the board.(please refer attachment) Glue...
Replies
2
Views
3,121
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
177
Hi I’m after some help , I have a plc program with a baumer verisens vision camera attached I have got the signals working ect but I have an...
Replies
9
Views
924
Hi all, We are facing synching issues with redundancy module, where the Primary is ending up with disqualified secondary. Normally this would...
Replies
2
Views
603
Hi all, I have got this machine that needs to be up and running soon. This machine has Schneider's Controller and I/O modules, 3 vfd's, 2...
Replies
2
Views
882
Back
Top Bottom