Hi i am trying to track parts through a 10 station die. as they are being moved by a walking beam after each stamp. there are sensors in each station. but there will not always be parts in all stations. so I need to know when to make that station sensors active or not. I primarily program in modicon. and not quite this complicated. how ever I know I can do it with a sense register a set register and a bit rotate. just not sure how to set it up. any suggestions will be great
Modicon Momentum
- Thread starter myenergy
- Start date
Similar Topics
I have a 170AAO92100 card that I am interested in using as a 10 volt output. Is there setup that I have to do in order to change output or simply...
Hi Guys,
Does Modicon M430 and Momentum Controller have In-Built Modbus SLAVE functionality or do I need to add a Modbus card to them? I'm...
First time with Unity Pro and a new Unity CBU (Central Brocessing Unit??):)
Trying to read the RTC but having no luck at all. Can't be that...
I have a customer who has a Momentum PLC in a machine. There is a soft start that runs a large hydraulic pump, and about 15 solenoid valves that...
Hey, gentlemens!
I have PLC Modicon Momentum 171-CCC-96030 and ModBus registers list.
I need connect to this PLC by ModBus TCP and reading...