S5 to S7 conversion- Help me!

titan84

Member
Join Date
Mar 2011
Location
Ha Noi
Posts
4
Hi everybody!
My system use simatic s5 system. It consists: S5 928B CPU (6ES5 928-3UB12) and about 20 ET200U ( 6ES5 318-8MB12), CPU connect to ETs using L2-DP card (6ES5 308-3UB11). Now, I have to convert my system from S5 to S7. You can help me make configuration of S7 System when i convert all S5 system? And I can replace CPU and retain ETs, and how is S7 configuration?
Thanks everybody
 
Thanks LD!
So, what kind of S7 CPU and ET200 can replace for S5 928B CPU (6ES5 928-3UB12)and ET200U (6ES5 318-8MB12)?
If retain ET200U, i can connect S7 CPU to ET200U?
 

Similar Topics

Hi all, I'm in the process of upgrading a PanelView1200 HMI program to be developed in FactroyTalk View Studio. The filetype for PanelView 1200...
Replies
7
Views
242
Hi guys, I have no experience when working with AllenBradley PLC, but I hope someone could clarify the result of multiplication shown in the...
Replies
14
Views
2,133
I have been tasked to upgrade some SquareD PLCs at our plant. I have done several of these upgrades without any issues. However, I have now met my...
Replies
4
Views
2,407
I am upgrading an existing PLC5 program to controllogix (L73 V23). For my question I will only use the logic for my CH1 on my 1771-IFE/C...
Replies
7
Views
2,757
Hi, I'm converting a modicon program to allen bradley. I'm hoping someone that knows modicon can help me to understand what is happening on this...
Replies
2
Views
1,540
Back
Top Bottom