Apacs does not reponse?

I been trying to config a server(NT) for DCS. But i can't get the Apacs real time server to run. every time i run the apacs exe file, a hourglass appears but disappear after awhile.No error code appeared.

I confirm the mbus_NET driver is correct and i using factory suite service pack E with a ISA M-net card. Should i install the M-net card first before installing the factory suite.
On the control panel, my m-net driver indicates operation. What's the different between operation and running?

Last but not least, anyone know any books on DCS.

Gee, I didn't use it in a looong time. Installed MNet card,
loaded software and it was working fine for me.
Unfortunatelly I don't have access to unit to try it out.
One thing we had problem with was to get redundancy work on
our PCs (at the time, we used super fast PII/266). Original
driver was ok with P150 or P166 but couldn't work properly
on machines running at ca. 200MHz or faster (even after few
changes in BIOS such as disabling CPU cache, lowering clock etc.). After while, Moore provided "temporary" solution
which was driver with lots of NOPs in a loop