Logo 340RC Copying Prog

Nafees

Member
N
Join Date
Mar 2011
Location
Kuwait
Posts
2
Dear Friends,

Im new to this. I have a PLC Logo 340RC working one. and one is spoilt.
brought a new one with Cable waiting for the software.
Can anyone guide me to copy the Prog for the old PLC to New One Step by Step.

Thanks In Advance
 
Well still no help.
but was able to connect the OLD PLC, its password protected can anyone please help how to retrieve the password from the PLC.

thanks
 

Similar Topics

T
LOGO! Help with understanding the tool for an assessment.
Hello Team, I am desperate for some help with an assessment I have as part of a Level 3 general engineering course. I am in a role that is much...
Replies
9
Views
345
TOMENGLAND
T
H
proximity switch siemens logo help
Hi all, First, thank you for reading the thread. So I had a task as the following: An up-counter must be programmed as part of a batch-counting...
Replies
7
Views
285
heyho
H
S
Flood Detection Siemens LOGO
Hi Lads, I want to implement a flood prevention system with my domestic water pump. The intention is to have the water pump cut off on a daily...
Replies
7
Views
1,077
stickman1019
S
drbitboy
LOGO! unexpected behavior
[Update: fixed a typo in the image.] See the image below, especially the blue-ish annotations. The three rungs ending in output coils -( ) are...
2
Replies
17
Views
980
drbitboy
drbitboy
theColonel26
Siemens LOGO
We need a Really Simple and Cheap controller that has a display or a Web Interface where we can change some set points. We were thinking about a...
Replies
2
Views
1,040
KonstantinKolev
K
Back
Top Bottom