Communication using cc link

vishnuk444

Member
Join Date
Mar 2011
Location
Man
Posts
2
hi guys...
I'm trying to connect two Mitsubishi FX3G plcs via cclink...
how to check if my connection are okay???
is that the software check??? my hardware is working properly(according to manual)....

thnx for the help and replies

:geek:
 

Similar Topics

Hello everyone, I am trying to change the IP address of the Omron PLC (NJ30-1200) and HMI (NB7W-TW01B) to fetch the network on our network...
Replies
7
Views
256
I am trying to establish communication between Siemens PLC 1500 and Matlab. I followed a tutorial on youtube at this link: But when I got to the...
Replies
0
Views
313
I have wasted a week trying to figure out how to connect an SLC5/03 with my laptop. I do not have and can not Buy the 1747 UIC and PC3 cables. I...
Replies
14
Views
2,477
Hello. I want to use micro850 to read and write registers from 120 modbus tcp devices. I want to know if anyone that implemented such a solution...
Replies
2
Views
456
Read and write the Tags direct using pycomm3 and LogixDriver. Just in case anybody wanted to know. Here's a sample: from pycomm3 import...
Replies
0
Views
777
Back
Top Bottom