ry_fern
Member
Hi guys,
Good day!
While I am doing my migration project, alarms in the PLC 5 program are block transferred to the PanelView Plus 1250 terminal. During testing, I found out that the alarms are included in a tag type "BLOCK". Reading the online help, the tag type of block is not supported. However, it did not mention what to do with this tags. Can anyone give me some tips or advise on how to convert this tag to make the alarms work?
Tag: Tag_BO1_0_0-16_15_Blk B07 00/00-16/15, L17
I am also attaching the block transfer and converted RIO config.
Thank you very much.
Good day!
While I am doing my migration project, alarms in the PLC 5 program are block transferred to the PanelView Plus 1250 terminal. During testing, I found out that the alarms are included in a tag type "BLOCK". Reading the online help, the tag type of block is not supported. However, it did not mention what to do with this tags. Can anyone give me some tips or advise on how to convert this tag to make the alarms work?
Tag: Tag_BO1_0_0-16_15_Blk B07 00/00-16/15, L17
I am also attaching the block transfer and converted RIO config.
Thank you very much.