HI I'm having trouble communicating with my plc.My pc is running windows 7.I use step7 v.4 and I have a simatic 224cpu.The cable I'm using is usb/ppi.For some reason there is no communication.I'm new in the field and I would appreciate any help.Sorry for my English also.Thank's in advance!
Communication error
- Thread starter stamatis
- Start date
Similar Topics
Hello all,
I am currently trying to establish a message instruction to pass data from a 1756-L73 to a 1756-L71. My communication path from the...
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310
I have prepared the plc programme, also created...
I don't know if this is the right place for the subject at least I'll try.
The company has one of the oldest computers that is a master Windows...
Hi there!
I got a HMI terminal Panelview Plus 7 (PN-332439 / CAT 2711P-T12W21D8S)
which work on a APP 8.00 i'm trying to modify with my FT View...
Hello,
We have several Yaskawa GA800's installed in our plant. They are all controlled via Ethernet and they work fine. However, they all get...