how can i know and emulate PID run ok in RSlogix5

Hi all,
how can i know and make sure PID run ok in RSlogix5

I just need Display 1 PID in RSview32? ,and make sure PID run good.

I havent got real/hardware PLC5 ,how can i know and make sure PID run ok in RSlogix5, could I use RSemulate to active this PID?
That's all.

Thank you

None of the RSLogix emulators perform real-time program execution, so they cannot correctly emulate the PID instruction.

You must use a PLC-5 controller, not RSEmulate 5, to test a PID instruction.

thank Mr.Ken so much,