CC-Link - different baud rate on remote i/o stations?

icekalt

Member
I
Join Date
Mar 2011
Location
Selangor
Posts
10
Hello all,

Let say I have 2 remote i/o stations connected to a master station via CC-Link protocol. Is it possible, let say, set the baud rate of 625 kbps on one remote i/o and baud rate of 2.5 Mbps to another remote i/o and the master has 2.5 Mbps?


Thx in advanced
 

Similar Topics

O
Link a button in Wonderware from 2 different PLC’s
Hello I was wondering how to link a button in Wonderware to two different PLC’s? This button is a reset button that resets both PLC’s. - one plc...
Replies
3
Views
225
Ones_Zeros
O
C
Mitsubishi R08SFCPU and RD78G8 communication to FR-E800SCE (Safety Version) on CC-link IE TSN
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
89
cottagewood
C
I
Rockwell and LR-TB Keyence Io Link
Hi everybody, I would like to know if anybody here has already programmed with a LR-TB keyence on Io Link on a Rockwell PLC? And perhaps have...
Replies
0
Views
76
I_robot72
I
I
Io link Keyence LR-TB2000CL with studio 5000
Hi everybody, Is anybody here still have programmed a Keyence sensor LR-TB2000CL and used it as io link material in studio 5000. I would like to...
Replies
0
Views
89
I_robot72
I
D
IO link compatibility
Hey there friends, recently discovered the world of industrial automation and learned what this fancy PLC can do so i am a super novice. Started...
Replies
10
Views
335
durallymax
D
Back
Top Bottom